Free xilog 3 download software at UpdateStar - Coupon Search Plugin for Firefox, find some of the best discounts and deals around from the best retailers on the net.

Ciao NG Situation: wood miller: RECORD 132 TVN AA17015080 (SCM GROUP) cam 2d: XILOG PLUS 1.11.011 plc: 50005 hardware cnc: 21425500 software cnc: 103,S,J,NUM,1040W Problem: client asks me to engrave a model using.iso file format (usable with.cnc extension). I downloaded “num10xx” post but I’m not able to import post in XILOG PLUS and in Interface Machine User. May be I’m making something wrong and my client can’t help me ( don’t know correct workflow).

Assistance told me that “AlphaCam” has correct post for num1040 cnc. But I have VisualMill: I’m not able to say how NUM1040 works and how to configure post in post processor generator. Perhaps someone here works with this wood miller and can help me.

Thanks in advance. Viktor Havlicek VM Design – Italy ___________________ Laudetur Jesus Christus Posts: 103 Joined: Wed Aug 01, 2007 4:15 pm Location: Camisano, Vicenza, Italy. Ciao Mitch yes. Your post suggest me that I have not to import my.cnc posted file in Xilog, but open it by machine interface user directly. I have tried but a long error list appeared on wood miller computer video. Example: iso change tool command is: T5.

NUM change comand: T=5. Is it correctly? Have I to insert other command strings? Viktor Havlicek VM Design - Italy _______________________ Laudetur Jesus Christus Posts: 103 Joined: Wed Aug 01, 2007 4:15 pm Location: Camisano, Vicenza, Italy.

Nvram database file mt6752 vs mt6753. Well, that stuff will need to be modified in the PostProcessor generator. I don't know who wrote the stock posts supplied with VM, but I have found a number of them to be incomplete. Hallo Christofer sorry for my absence but I had a lot of internet problems. I hope I will be able to surf internet without handicap.

Yes, I'm interesting in your post. I have learnt AlphaCam6 (my client has alphacam 5 standard router) and we have egraved ornament on wood table. I tought him alphacam5 but. Now he asked me to make two wall-watch (is it correct?) and I want use VisualMill. I have no experience to make post processor for scm controller and testing it. Thanks and sorry again for my silence.

Regards Viktor Havlicek VM Design _______________________ Laudetur Jesus Christus Posts: 103 Joined: Wed Aug 01, 2007 4:15 pm Location: Camisano, Vicenza, Italy.

I have been an Aspire user for some time and am looking forward to the new aspire upgrade. Up to date I have been using the WinCNC PC based controller on some lighter weight machines 2000lbs or so ( 48' by 60' work area). I recently got hold of an SCM 120S, 10000lbs, which falls in the heavy weight category for me. I am trying to figure out if an aspire post is available, the software PC interface to the num 1020W controller is what is called PC-MMI.

The tools I use for design are Aspire and other software, they get the job done at reasonable cost. I have the machine fully functional and everything has been tested using Mcodes and Gcodes via the NUM MMI PC interface. I have attached a file ( normally called a.xpi file on the machine) can the vectric team let me know if you can do a post or let me know if a post is already available?

Thanks very much. If anybody else wants to chip in with any information of comments it would be appreciated The SCM North America team have not been very helpful. I do not want to go down the Alphacam route because I am very happy with the tools I have and money is an issue. I am confused about the Xilog platform and if Xilog can be run on this year machine. I think Xilog may even just get in the way, but I know nothing about it so better keep my mouth shut.

If I can operate Gcode l similar to WinCNC I am happy. Naively, I thought I could just call SCM and ask them to forward the Xilog disks and operating manual, but of course they wanted to make a meal out of it saying a 2 day trip is required etc, expenses, etc --- $5000.00---. Not impressed, I have purchased other SCM stationary machines and love the brand but the attitude of the customer service is disappointing at best. If you are lost in the desert do not ask SCM for directions to the nearest watering hole!!! Attachments (1.6 KiB) Downloaded 298 times Posts: 2 Joined: Wed Feb 13, 2013 8:11 pm Model of CNC Machine: routech 120s.